Search this site

< Back MTD-06-2024 Issue 2 - Pietenpol Air Camper Wing Rear Strut Internal Corrosion 24 Jul 2026 MTD-06-2024 Issue 2 – Pietenpol Air Camper Wing Rear Strut Internal Corrosion Issue 1 of this MTD, issued in 2024, required inspection of the rear 'Jim Wills' type struts for corrosion, replacement of any corroded struts, and the drilling of a single drain hole in the end cap of each strut. MTD-06-2024 Issue 2 supersedes Issue 1 and introduces revised drain hole requirements based on feedback from the field. Aircraft fitted with Jim Wills rear wing struts must have the struts inspected for internal and external corrosion. For aircraft that have not previously complied with Issue 1, the requirements of Issue 2 must be completed before next flight. For aircraft that have already complied with Issue 1, the additional requirements introduced in Issue 2 must be completed by 31st December 2027. Please refer to the MTD-06-2024 Issue 2 document for full applicability, aircraft identification guidance, and compliance requirements. This MTD can be found HERE and is also available below. 20260724 - MTD-06-2024 - Pietenpol Air Camper Struts Issue 2.docx .pdf Download PDF • 924KB Next Previous

< Back New LAA Inspector - Alan Caldecourt 24 Oct 2024 The LAA is pleased to welcome Alan Caldecourt as a new LAA Inspector. Alan attended an Assessment Day at LAA HQ last month. Alan has experience of both wood and metal airframes, in full restoration and modifications (Rollason Condor & Luscombe Silvaire). In 2008, he completed a RV7 build and recommissioned a Taylor Monoplane in 2020. His whole career has been in the Airline Maintenance Industry, starting as an Apprentice with B.O.A.C in 1973, becoming a Licenced Aircraft Engineer. After 47 years service, he retired in 2020 along with the British Airways 747 Fleet ! He is currently based at Popham Airfield, but lives in West Sussex. Well done Alan! 🎉 Next Previous

< Back MTD-01-2025 ISSUE 2 published - Zenair Tailplane Brackets 28 Aug 2025 MTD-01-2025 - 'Inspection of horizontal stabiliser (tailplane) attachment brackets and associated hardware for cracks, looseness and other forms of distress' for Zenair CH601, CH650, CH701, CH750 and variants of these four models has been upissued to Issue 2. This is in order to correct an error in the 'Effective Date' of this MTD. This MTD can be found HERE and is also available below. A number of cases have been found whereby the structural integrity of the horizontal stabiliser mountings on the Zenair types identified above have been compromised by one or more of the following: cracking of the attachment brackets oversize holes loose rivets distorted and chafed brackets. These problems could occur due to a number of factors including poor build quality, a build-up of tolerances in the positioning or dimensions of the brackets, improper assembly, rough treatment or in-flight vibration. Failure of a tailplane attachment could result in degraded controllability in flight or loss of control. Special inspections of this area have been recommended by Zenair since January 2017, in their document ‘Mandatory Action. Jan. 2017 – Inspection of Horizontal Stabilizer tail attachment brackets’. This Mandatory Technical Directive mandates this safety action for aircraft operating on LAA Permits to Fly. 20250828 - MTD-01-2025 - Zenair Tailplane Brackets - Issue 2 .pdf Download PDF • 183KB Next Previous

< Back New LAA Inspector - Tomas del Carpio 15 Aug 2025 We are pleased to welcome Tomas del Carpio as a new LAA Inspector, having attended an LAA Inspector Assessment Day at Turweston recently. Living in the historic village of the former RAF Upper Heyford base, aviation is a part of Tomas’ life even outside of my daily job of restoring and maintaining vintage and modern light aircraft. He has been in the aircraft maintenance industry since 2008 but the age range of aircraft. He has worked on spans more than a century of aviation history. From helping to restore an original AVRO 504 to carrying out advanced composite carbon fibre repairs on a Diamond DA42, his experience covers a broad and diverse spectrum of aircraft types and technologies - both certified and non-certified. Whether it’s performing an engine change on a King Air in the dusty heat of Malta or changing a tyre on a stranded PA-28 in a muddy field in Kent, He has encountered a wide variety of challenges and learned something valuable from each one. Tomas is always happy to help and share his knowledge and experience whether it’s offering technical advice over the phone or getting hands-on with something more involved. Next Previous

< Back New LAA Inspector - Clive Sutton 28 Mar 2024 The LAA is pleased to welcome Clive Sutton as a new LAA Inspector. Clive came to an Assessment Day at LAA HQ at the start of March. Clive is ex-RAF, a Chartered Engineer and a BMAA Inspector. He prefers composite & metal airframes and Rotax 4-stroke engines (especially the Europa type). He has little experience with 2-strokes of Continentals/Lycomings or wood and fabric aircraft. He is ready to travel a maximum of an hour; Wellesbourne, Bidford and Coventry are within easy reach for him. Next Previous

< Back LAA 'Grass Roots Fly-In' returns 23 Apr 2023 The LAA is returning to the green grass of Popham Aerodrome in Hampshire for a repeat of its “Grass Roots Fly In” from 18th to 20th August 2023. The Fly-In will again on one hand take the Associate back to its traditional roots, while continuing to offer the first chance to see some of the latest aircraft and products in the recreational aviation market. What was particularly notable about the 2022 Popham event was its sociality. LAA members and exhibitors alike commented on its relaxed and friendly atmosphere, with post-event comments such as “It’s a great reunion as well as a fly-in–cum trade show” and “super friendly, the event always had a good vibe”. A joint venture with Popham Aerodrome, the LAA Grass Roots Fly In will develop its strengths as a social event bringing flyers from around the UK and Europe to meet fellow enthusiasts. The grass runways at Popham and the airfield’s famed rural ambience will mean that the event will focus on the fly-in and social element as much as on a large exhibition campus. The earlier mid-August date will also mean longer evenings, allowing more scope for flyers from further afield and hopefully, milder conditions for those who choose to ‘camp under the wing’. Said LAA CEO designate Simon Tilling: “The LAA Grass Roots Fly In was a great success last year, with over 3,000 visitors, more than 30 exhibitors and a total of 350 visiting aircraft through the weekend. It is a different event to the past, larger scale LAA Rallies and we’re working on plans for the continuation of a larger scale LAA event in the future. For this year, we’re looking forward to another great, social and fun, LAA fly in”. Next Previous

< Back MTD-06-2026 - Vixxen Forward Wing Attachment Reinforcement 14 Aug 2026 LAA Mandatory Technical Directive MTD-06-2026 Issue 1 has been issued today, relating to the inspection and reinforcement of the forward wing attachments of A-32 Vixxen and A-32-M Vixxen aircraft operating on an LAA Permit to Fly with Aeroprakt serial numbers up to and including #370 , which have accumulated 3000 flight hours or more. In December 2025, Aeroprakt issued Service Bulletin SB A32-25 to address cracking in the spar wall (web) and in the reinforcing plate near the forward wing attachment fitting, which, according to Aeroprakt, may lead to the disintegration of the aircraft in flight. Given the severe consequence identified in the Service Bulletin, this MTD is raised to mandate the reinforcement of the forward wing attachment fittings as described in SB A32-25 for aircraft within the applicable serial number range, which have accumulated 3000 flight hours or more. For aircraft in the affected serial number range which have not accumulated 3000 flight hours, the reinforcement remains a recommendation in line with SB A32-25. Please refer to the MTD below for full applicability, aircraft identification guidance, and compliance requirements. MTD-06-2026 - Vixxen Foward Wing Attachment Reinforcement .pdf Download PDF • 147KB SB-A32-25 - Reinforcement of forward wing attachment fittings .pdf Download PDF • 1.22MB Next Previous

< Back Permit Revalidation Forms updated 1 Dec 2023 The Airworthiness Review Report (LAA/ARR-1) and Permit Revalidation Application (LAA/PTF-REVAL) forms have both been upissued to Issue 6. These forms form part of the Permit to Fly Revalidation Process. The latest issues of the forms can be downloaded here . Technical Leaflet 2.00 (Revalidating your Aircraft's Permit to Fly) has also been updated to Issue 5 to reflect these changes and can be downloaded here . Next Previous

< Back Alert A-12-2025 - Aeroprakt windscreens 14 Oct 2025 LAA Engineering has issued Alert A-12-2025 to highlight the recent issue of a series of Aeroprakt service bulletins that require older style windscreens to be replaced at certain intervals, with the Vne of the aircraft being temporarily reduced in certain circumstances. A-12-2025 - Aeroprakt windscreens issue 1 .pdf Download PDF • 231KB Next Previous

Avgas UL91 & UL94 UL91 has been supplied at many airfields for a number of years. UL94 (similar to UL91 but with a slightly higher octane rating) is now becoming available. These fuels are suitable, and approved, for a wide range of engines types used in LAA aircraft. With 100LL being phased out over the coming years, now is an ideal time to see if your engine is compatible and help do your bit for the environment. The LAA Airworthiness Approval Note (AAN) for use of UL91 & UL94 in appropriate LAA aircraft can be found here . It contains a list of the most popular types of engines for which the fuel is suitable. The EASA document pertaining to use of UL91 in non LAA types is available here.

< Back MTD-05-2024 - Jabiru Distributor Caps - Issue 2 23 Jul 2025 MTD-05-2024 - Jabiru Distributor Caps - has been upissued to Issue 2 today. This MTD can be found HERE and is also available below. On 10th July 2024, LAA Engineering published Issue 1 of MTD-05-2024. This was published due to apparent variations in the design of the distributor caps and rotor arms on Jabiru 2200 engines, which meant that, in some cases, there was insufficient clearance between the rotor arm and centre boss of the distributor cap, causing the contact button of the distributor cap to be flattened against its range of travel by the rotor arm, which causes extremely accelerated wear leading to ignition issues and potential engine failures. Today, Issue 2 of MTD-05-2024 has been issued, superseding Issue 1. Issue 1 of MTD-05-2024 detailed a method for ensuring sufficient clearance between the centre boss of the distributor cap and the rotor arm. This method has now been superseded by Jabiru’s Service Bulletin JSL050. LAA MTD-05-2024 Jabiru distributor cap Iss 2 .pdf Download PDF • 294KB Next Previous

Membership Full Plus Category is for members who own, operate or are currently building an aircraft and gives access to LAA Engineering services. (For Group Owned aircraft, at least one member of the group must have Full Plus membership.) Full Category is for everyone else and includes a monthly copy of Light Aviation Magazine and a discount at the annual LAA Fly-In. JOIN THE LAA Member Full - £75 Full Plus - £117 Member Joint Full - £85 Full Plus - £139 Joint members are members who are the partner of a full member or any children under the age of 18 and living at the same address. Under 30 Member Full - £31 Full Plus - £117 Please forward proof of DOB i.e. copy of passport, driving licence or pilots licence if applying for the FULL membership. Overseas Member Full - £91 Full Plus - £139 Overseas includes Ireland. Payment Methods ONLINE Via the Member Area / Renew my Membership DIRECT DEBIT You are now able to set up your direct debit online. Please see your renewal or joining page for details. BY CALLING HQ 01280 846 786 with card details NOTE: Permit Revalidation payments are taken ONLINE only through the Permit Revalidation online system BY INTERNET BANKING Please ensure you pay the correct fees for 2026 Account No : 26225220 Sort Code : 60-30-03 Please note, for membership payments, you MUST quote your membership number and your surname or your payment will not be credited to the correct record. For Permit revalidation & engineering fees, you MUST quote your aircraft registration. If paying from abroad, SWIFT code is : NWBKGB2L IBAN code is : GB81 NWBK 6030 0326225220 Important Links RENEW MY MEMBERSHIP MY AIRCRAFT DETAILS MEMBER AREA ADDRESS CHANGE