Search this site

< Back MTD-04-2025 upissued to Issue 2 - Rans Control Linkage Rod End Connector Safety Washers 18 Nov 2025 MTD-04-2025 Issue 2 - Rans Control Linkage Rod End Connector Safety Washers MTD-04-2025 Issue 1 was recently published to mandate the replacement of all plastic control linkage rod end connector washers with metal washers . It has become apparent that the washers specified in this MTD are not suitable to replace the plastic washers due to their dimensions. MTD-04-2025 Issue 2 has been raised in order to amend the specification of the metal washers that must used to replace plastic washers. Therefore, MTD-04-2025 Issue 2 supersedes Issue 1. Issue 1 of this MTD is now cancelled. Please refer to the attached MTD document for full details and compliance instructions, which can also be found on the LAA website HERE . MTD-04-2025 - Rans Rod End Washers - Issue 2 .pdf Download PDF • 293KB Next Previous

< Back Engineering updates in March 1 Apr 2026 The following documents have been issued/updated in the Engineering 'Info Library' during March. Technical Leaflets : TL 3.25 'Flight test briefing' TADS: Sling 2 Sling 4 Sling 4 TSi Next Previous

< Back New LAA Inspector - Steve Hodge 4 Apr 2024 The LAA is pleased to welcome Steve Hodge as a new LAA Inspector. Steve came to an Assessment Day at LAA HQ at the start of March. Steve has been part of the aviation trade since 1997, when he joined Arrow Aviation Services as a trainee. He pretty much learnt his entire trade there and was very fortunate to have worked with a wide variety of components from engines and propellers, to wheels and brakes, with a lot of vintage aviation thrown in too. His is now as Owner and Accountable Manager of his own company, SOAR Aviation, a CAA Part 145 approved facility. He continues to provide the aviation industry with what he hopes is thought of as an honest, reliable, friendly and cost-effective service. He has always been involved with the LAA and enjoys serving the LAA community. Next Previous

Flight Testing Aircraft The following current flight test schedules are available for printing. These schedules are subject to change at any time and without notice. Ensure that the current flight test schedule is used otherwise it may not be accepted. For this reason it is not advisable to save these document on your computer. Flight Testing Forms & Schedules Other useful documentation is as follows: TL 1.19 Initial Testing Flying Pilot Briefing for First Flight TL 2.00 Revalidating a Permit to Fly CAP 1038 CAA Check Flight Handbook TL 3.19 Auto-Pilot Flight Test Notes TL 3.22 Flight Test Reports TL 3.23 Constant Speed Prop Set-Up TL 3.25 General notes and limitations on test flights Airpseed Indicator Calibration Climb-Performance Plotter FAA Flight Testing Handbook

< Back New General Aviation Regulations 2024 15 Feb 2024 It is anticipated that on Saturday 6th April 2024, the 2024 regulations will enter into force. A draft version of the regulations is available online: The General Aviation (Persons on Board, Flight Information and Civil Penalties) Regulations 2024. For more information, read the document found here: The General Aviation (Persons on Board Flight Information and Civil Penalties) Regulations .pdf Download PDF • 72KB Next Previous

< Back LAA Training Day 30 Nov 2024 LAA Staff Training Day so LAA HQ will be closed. Next Previous

Light Aviation Magazine 2023 Click on the links below to open each issue of Light Aviation Magazine from 2023 January 2023 April 2023 July 2023 October 2023 February 2023 May 2023 August 2023 November 2023 March 2023 June 2023 September 2023 December 2023

< Back Standard Modification for fresh air rotary ventilators added for Europa types 18 Oct 2023 A new Standard Modification (SM12871) has been uploaded to the website for Europa types. This covers the installation of rotary air vents in the forward cockpit to aid ventilation. Standard Modifications are used to enable other owners to install a modification on a given type, generally by following the instructions in the Standard Modification leaflet, having their inspector check and sign it off and letting LAA Engineering know that it's been installed. Further information on the Standard Modification process can be found in TL 3.06 Standard Modification leaflets can be found by following Engineering - Info Library - Engineering - Standard Modifictations. Technical leaflets can be found by following Engineering - Info Library - Engineering - Technical Leaflets. Next Previous

< Back The online Permit Revalidation System is live for Gyroplanes! 22 Jul 2025 We are pleased to announce that the online Permit to Fly revalidation system went live today for gyroplanes, both home-built and factory-built! Step-by-Step Video Guide, FAQs and Crib Sheet The step-by-step guide to the new online Permit Revalidation system in the form of an ‘ Online Permit Revalidation Explained ’ video can be found below. This was written for a fixed-wing example, but the majority of questions are the same for gyroplanes and the process for gyroplanes has the same three stages as for any fixed-wing aircraft. https://www.youtube.com/watch?v=rOGRQ89dOA8 We have also compiled a list of ‘ Frequently Asked Questions ’ for you, which are found below. The ' Crib Sheet ' for Inspectors referenced in the video is formally called the ' Airworthiness Review Reference Guide ' and is available HERE . There is a version of the crib sheet for homebuilt gyroplanes, entitled ARR-REF (HOMEBUILT GYROPLANE) and a version for factory-built gyroplanes, entitled ARR-REF (FB GYROPLANE). The Check Flight Schedules for both homebuilt and factory-built gyroplanes have now been combined into a single check flight schedule for gyroplanes, entitled CFS-1 (GYRO). This is available HERE . Previous check flight forms for homebuilt and factory-built gyroplanes are now obsolete. The Permit Flight Release Certificate (PFRC) is now a separate document, where it was previously contained within the application form for revalidating a Permit to Fly. It can be found HERE . Key Considerations There are a few key considerations to ensure a Permit to Fly revalidation under the new system goes smoothly: Please make sure you know your username and password for the LAA website. If you have forgotten your login details, please contact the LAA Office. All aircraft using the new system for the first time will require a check flight no older than 3 months at the time of submission of the revalidation application. This is in order to provide a baseline for the online system. The 3-year check flight cycle will then apply subsequently to most aircraft types. Some aircraft will still require a check flight at every revalidation, these are: Aircraft cleared for Night/IFR. Aircraft which have flown less than 12 hours since the previous revalidation inspection. Aircraft Owners will not have to submit a CFS-1 (GYRO) Check Flight Schedule when applying through the new system. However, a CFS-1 (GYRO) will need to be completed for each check flight and stored with the aircraft’s documentation, so that it is available when needed. We will no longer be accepting old-style (paper or scanned) Airworthiness Reviews for homebuilt or factory-built gyroplanes conducted on or after 22 nd July 2025. Need Help? The ‘Revalidating a Permit to Fly’ page on the LAA website signposts you to all the information you will need and can be found HERE . If you have any problems or questions, please follow the steps below: Watch the ‘ Online Permit Revalidation Explained ’ video found HERE . Read Technical Leaflet 2.00 - 'Revalidating your Aircraft's Permit to Fly,' which has now been updated to include information for gyroplanes. Look at the gyroplane variants of the 'crib sheet' for LAA Inspectors, entitled ' Airworthiness Review Reference Guide ,' which is available HERE . Look at our list of FAQs ,. If steps 1-4 do not help you find the answer, contact LAA Engineering on engineering@laa.uk.com or call (0)1280 846786 20250721 - Permit Revalidation Process FAQs Issue 2 .pdf Download PDF • 198KB Next Previous

< Back MTD- 04-2026 Issue 1 - Vans Fuel Pick Up Failure 28 Jul 2026 MTD- 04-2026 Issue 1 - Vans Fuel Pick Up Failure Following consultation on the draft Mandatory Technical Directive (MTD), we have published the final MTD-04-2026 Issue 1, effective 28 July 2026. This MTD relates to confirming which aircraft have embodied Van’s SB 06-2-23, requiring wire locking of the fuel pick-up assemblies in the wing fuel tanks, or have the later T-715 anti-rotation brackets fitted. It follows a recent incident involving a Van’s RV-6 suffering a fuel starvation event in flight, due to a fuel pick-up tube becoming detached after the retaining nut had come undone. Upon inspection, it was found that the wire locking had not been incorporated and the airframe logbook did not show an entry confirming compliance with SB 06-2-23. Owners are required to review their aircraft records and, where compliance with SB 06-2-23 cannot be confirmed, nor the fitment of T-715 anti-rotation brackets, Owners must complete the inspections and actions specified in the MTD within the next 25 flying hours or at the next Permit to Fly revalidation, whichever occurs first. Compliance with this MTD must be recorded in the aircraft airframe logbook. If applicable, the entry must also state compliance with Van’s SB 06-2-23 or the fitment of T-715 anti-rotation brackets. Otherwise, there must be a logbook entry, signed by the Owner, explaining why SB 06-2-23 has not been embodied, or T-715 anti-rotation brackets fitted. Please refer to MTD-04-2026 Issue 1 document for full identification guidance and compliance requirements HERE and is also available below. MTD-04-2026 Issue 1 - Vans Fuel Pick-Up .pdf Download PDF • 391KB Next Previous

< Back MTD-03-2025 - Marquart Charger Aileron Slave Strut 25 Jul 2025 LAA MTD-03-2025 - Marquart Charger Aileron Slave Strut The starboard aileron slave strut on Marquart Charger G-BHBT failed at the AN490 threaded fitting welded into the bottom end. A large proportion of the cross-section was cracked due to fatigue prior to final failure. The root cause of the fatigue cracking was probably flutter. Due to the difficulty of reliably inspecting for fatigue cracking at the base of threads, it has been decided to withdraw this strut design from the UK fleet. MTD-03-2025 can be found HERE and is found below. MTD-03-2025 - Marquart Charger Aileron Slave Strut .pdf Download PDF • 194KB Next Previous

< Back New LAA Course dates released 6 Oct 2023 Dates have now been published for upcoming LAA Courses for the rest of this year. To find out about specific courses and their dates, click here . Please note, the next 'Caring for your Gipsy Major' course is on the 11th November, not 7th November, as published in the latest edition of Light Aviation magazine. Next Previous